Joint Repairs/Re-Seals

Arris repairs are required after construction joint f

ailure. Construction joint failure is typical in most concrete floors and can cause serious & expensive damage to forklift trucks aswell as becoming a health and safety issue. The replacement of the joint is carried out quickly and effectively by saw cutting and breaking out the damaged area and filling with a specialist repair mortar. The joint is then cut back through with a 5mm.

cut and then sealed with a specialist sealant and left smooth with no transition over the repair. Our repair is tried & tested over many years and proved very successful and long lasting. Re-sealing of construction joints is also one of our fortes - these can be achieved on joints of upto 20mm.

Contact Us

Tel: 01484 860054

Mobile: 07782 214814

Fax: 01484 866726

Make An Enquiry

Feel free to get in contact with us by sending us a message using our enquiry form.

Featured Work

Featured work
PSR Ltd are recognised contractors with such clients as Coca-Cola Enterprises Ltd & Several forklift truck suppliers to name but a few. Please view our Gallery to see some of our work.

View Gallery

Our Services

Floor Preparation
Preparing Surfaces to enable good bonding before any application can be made.

Floor Grinding
PSR provide floor grinding services to level out problem floors.

Floor Coatings & Paints
PSR specialise in Epoxy High Build Coatings with or without non-slip surfaces.

Floor Repairs
Construction joint failure can cause serious and expensive damage to forklift trucks etc. Our process leaves seamless transition over the joint.

Joint Re-Seal
Re-seal replacement to existing saw cut and construction joints are solved by re-cutting.

Floor Screeds
These cemiticous screeds can be put down from as little as 3mm thick, which will upgrade existing concrete.